Skip to content

KubeStellar has multiple documentation versions to match its multiple releases.
Please make sure you are viewing the docs version which matches the release version of the code you are using!

KubeStellar Core chart usage#

This documents explains how to use KubeStellar Core chart to do three of the 11 installation and usage steps; please see the full outline for generalities and Getting Started for an example of usage.

This Helm chart can do any subset of the following things.

  • Initialize a pre-existing cluster to serve as the KubeFlex hosting cluster.
  • Create some ITSes.
  • Create some WDSes.

The information provided is specific for the following release:

export KUBESTELLAR_VERSION=0.25.0-rc.2

Pre-requisites#

To install the Helm chart the only requirement is Helm. However, additional executables may be required to create/manage the cluster(s) (e.g., Kind and kubectl), to join Workload Execution Clusters (WECs) (e.g., clusteradm), and to interact with Control Planes (e.g., kubectl), etc. For such purpose, a full list of executable that may be required can be found here.

The setup of KubeStellar via the Core chart requires the existence of a KubeFlex hosting cluster.

This can be:

  1. A local Kind or k3s cluster with an ingress with SSL passthrough and a mapping to host port 9443

    This option is particularly useful for first time users or users that would like to have a local deployment.

    It is important to note that, when the hosting cluster was created by kind or k3s and its Ingress domain name is left to default to localtest.me, then the name of the container running hosting cluster must be also be referenced during the Helm chart installation by setting --set "kubeflex-operator.hostContainer=<control-plane-container-name>". The <control-plane-container-name> is the name of the container in which kind or k3d is running the relevant control plane. One may use docker ps to find the <control-plane-container-name>.

    If a host port number different from the expected 9443 is used for the Kind cluster, then the same port number must be specified during the chart installation by adding the following argument --set "kubeflex-operator.externalPort=<port>".

    By default the KubeStellar Core chart uses a test domain localtest.me, which is OK for testing on a single host machine. However, for scenarios that span more than one machine, it is necessary to set --set "kubeflex-operator.domain=<domain>" to a more appropriate <domain> that can be reached from Workload Execution Clusters (WECs).

    For convenience, a new local Kind cluster that satisfies the requirements for KubeStellar setup and that can be used to exercises the examples can be created with the following command:

    bash <(curl -s https://raw.githubusercontent.com/kubestellar/kubestellar/v$KUBESTELLAR_VERSION/scripts/create-kind-cluster-with-SSL-passthrough.sh) --name kubeflex --port 9443

    Alternatively, a new local k3s cluster that satisfies the requirements for KubeStellar setup and that can be used to exercises the examples can be created with the following command:

    bash <(curl -s https://raw.githubusercontent.com/kubestellar/kubestellar/v$KUBESTELLAR_VERSION/scripts/create-k3s-cluster-with-SSL-passthrough.sh) --port 9443

  2. An OpenShift cluster

    When using this option, one is required to explicitly set the isOpenShift variable to true by including --set "kubeflex-operator.isOpenShift=true" in the Helm chart installation command.

KubeStellar Core Chart values#

The KubeStellar chart makes available to the user several values that may be used to customize its installation into an existing cluster:

# Control controller log verbosity
# The "default" verbosity value will be used for all controllers unless a specific controller verbosity override is specified
verbosity:
  default: 2
  # Specific controller verbosity overrides:
  # kubestellar: 6 (controller-manager)
  # clusteradm: 6
  # transport: 6

# KubeFlex override values
kubeflex-operator:
  install: true # enable/disable the installation of KubeFlex by the chart (default: true)
  installPostgreSQL: true # enable/disable the installation of the appropriate version of PostgreSQL required by KubeFlex (default: true)
  isOpenShift: false # set this variable to true when installing the chart in an OpenShift cluster (default: false)
  # Kind cluster specific settings:
  domain: localtest.me # used to define the DNS domain name used from outside the KubeFlex hosting cluster to reach that cluster's Ingress endpoint (default: localtest.me)
  externalPort: 9443 # used to set the port to access the Control Planes API (default: 9443)
  hostContainer: kubeflex-control-plane # used to set the name of the container that runs the KubeFlex hosting cluster (default: kubeflex-control-plane, which corresponds to a Kind cluster with name kubeflex)

# Determine if the Post Create Hooks should be installed by the chart
InstallPCHs: true

# List the Inventory and Transport Spaces (ITSes) to be created by the chart
# Each ITS consists of a mandatory unique name and an optional type, which could be either host or vcluster (default to vcluster, if not specified)
ITSes: # ==> installs ocm + ocm-status-addon

# List the Workload Description Spaces (WDSes) to be created by the chart
# Each WDS consists of a mandatory unique name and several optional parameters:
# - type: host or k8s (default to k8s, if not specified)
# - APIGroups: a comma separated list of APIGroups
# - ITSName: the name of the ITS control plane to be used by the WDS. Note that the ITSName MUST be specified if more than one ITS exists.
WDSes: # ==> installs kubestellar + ocm-transport-plugin

The first section of the values.yaml file refers to parameters that are specific to the KubeFlex installation, see here for more information.

In particular: - kubeflex-operator.install accepts a boolean value to enable/disable the installation of KubeFlex into the cluster by the chart - kubeflex-operator.isOpenShift must be set to true by the user when installing the chart into a OpenShift cluster

By default, the chart will install the KubeFlex and its PostgreSQL dependency.

The second section allows a user of the chart to determine if Post Create Hooks (PCHes) needed for creating ITSes and WDSes control planes should be installed by the chart. By default InstallPCHs is set to true to enable the installation of the PCHes, however one may want to set this value to false when installing multiple copies of the chart to avoid conflicts. A single copy of the PCHes is required and allowed per cluster.

The third section of the values.yaml file allows one to create a list of Inventory and Transport Spaces (ITSes). By default, this list is empty and no ITS will be created by the chart. A list of ITSes can be specified using the following format:

ITSes: # all the CPs in this list will execute the its.yaml PCH
  - name: <its1>          # mandatory name of the control plane
    type: <vcluster|host> # optional type of control plane host or vcluster (default to vcluster, if not specified)
  - name: <its2>          # mandatory name of the control plane
    type: <vcluster|host> # optional type of control plane host or vcluster (default to vcluster, if not specified)
  ...

where name must specify a name unique among all the control planes in that KubeFlex deployment and the optional type can be either vcluster (default) or host, see here for more information.

The fourth section of the values.yaml file allows one to create a list of Workload Description Spaces (WDSes). By default, this list is empty and no WDS will be created by the chart. A list of WDSes can be specified using the following format:

WDSes: # all the CPs in this list will execute the wds.yaml PCH
  - name: <wds1>     # mandatory name of the control plane
    type: <host|k8s> # optional type of control plane host or k8s (default to k8s, if not specified)
    APIGroups: ""    # optional string holding a comma-separated list of APIGroups
    ITSName: <its1>  # optional name of the ITS control plane, this MUST be specified if more than one ITS exists at the moment the WDS PCH starts
  - name: <wds2>     # mandatory name of the control plane
    type: <host|k8s> # optional type of control plane host or k8s (default to k8s, if not specified)
    APIGroups: ""    # optional string holding a comma-separated list of APIGroups
    ITSName: <its2>  # optional name of the ITS control plane, this MUST be specified if more than one ITS exists at the moment the WDS PCH starts
  ...

where name must specify a name unique among all the control planes in that KubeFlex deployment (note that this must be unique among both ITSes and WDSes), the optional type can be either k8s (default) or host, see here for more information, the optional APIGroups provides a list of APIGroups, see here for more information, and ITSName specify the ITS connected to the new WDS being created (this parameter MUST be specified if more that one ITS exists in the cluster, if no value is specified and only one ITS exists in the cluster, then it will be automatically selected).

KubeStellar Core Chart usage#

A specific version of the KubeStellar core chart can be simply installed in an existing cluster using the following command:

helm upgrade --install ks-core oci://ghcr.io/kubestellar/kubestellar/core-chart --version $KUBESTELLAR_VERSION

The above command will install KubeFlex and the Post Create Hooks, but no Control Planes. Please remember to add --set "kubeflex-operator.isOpenShift=true", when installing into an OpenShift cluster.

User defined control planes can be added using additional value files of --set arguments, e.g.:

  • add a single ITS named its1 of default vcluster type: --set-json='ITSes=[{"name":"its1"}]'
  • add two ITSes named its1 and its2 of of type vcluster and host, respectively: --set-json='ITSes=[{"name":"its1"},{"name":"its2","type":"host"}]'
  • add a single WDS named wds1 of default k8s type connected to the one and only ITS: --set-json='WDSes=[{"name":"wds1"}]'

A KubeStellar Core installation that is consistent with Getting Started and and supports the example scenarios could be achieved with the following command:

helm upgrade --install ks-core oci://ghcr.io/kubestellar/kubestellar/core-chart --version $KUBESTELLAR_VERSION \
  --set-json='ITSes=[{"name":"its1"}]' \
  --set-json='WDSes=[{"name":"wds1"}]'

After the initial installation is completed, there are two main ways to install additional control planes (e.g., create a second wds2 WDS):

  1. Upgrade the initial chart. This choice requires to relist the existing control planes, which would otherwise be deleted:

    helm upgrade --install ks-core oci://ghcr.io/kubestellar/kubestellar/core-chart --version $KUBESTELLAR_VERSION \
  --set-json='ITSes=[{"name":"its1"}]' \
  --set-json='WDSes=[{"name":"wds1"},{"name":"wds2"}]'

  2. Install a new chart with a different name. This choice does not requires to relist the existing control planes, but requires to disable the reinstallation of KubeFlex and PCHes:

    helm upgrade --install add-wds2 oci://ghcr.io/kubestellar/kubestellar/core-chart --version $KUBESTELLAR_VERSION \
  --set='kubeflex-operator.install=false,InstallPCHs=false' \
  --set-json='WDSes=[{name":"wds2"}]'

Kubeconfig files and contexts for Control Planes#

It is convenient to use one kubeconfig file that has a context for each of your control planes. That can be done in two ways, one using the kflex CLI and one not.

  1. Using kflex CLI

    The following commands will add a context, named after the given control plane, to your current kubeconfig file and make that the current context. The deletion is to remove an older vintage if it is present.

    kubectl config delete-context $cpname
kflex ctx $cpname

    The kflex ctx command is unable to create a new context if the current context does not access the KubeFlex hosting cluster AND the KubeFlex kubeconfig extension remembering that context's name is not set; see the KubeFlex user guide for your release of KubeFlex for more information.

    To automatically add all Control Planes as contexts of the current kubeconfig, one can use the convenience script below:

    echo "Getting the kubeconfig of all Control Planes..."
for cpname in `kubectl get controlplane -o name`; do
  cpname=${cpname##*/}
  echo "Getting the kubeconfig of Control Planes \"$cpname\"..."
  kflex ctx $cpname
done

    After doing the above context switching you may wish to use kflex ctx to switch back to the hosting cluster context.

    Afterwards the content of a Control Plane $cpname can be accessed by specifying its context:

    kubectl --context "$cpname" ...

  2. Using plain kubectl commands

    The following commands can be used to create a fresh kubeconfig file for each of the KubeFlex Control Planes in the hosting cluster:

    echo "Creating a kubeconfig for each KubeFlex Control Plane:"
for cpname in `kubectl get controlplane -o name`; do
  cpname=${cpname##*/}
  echo "Getting the kubeconfig of \"$cpname\" ==> \"kubeconfig-$cpname\"..."
  if [[ "$(kubectl get controlplane $cpname -o=jsonpath='{.spec.type}')" == "host" ]] ; then
    kubectl config view --minify --flatten > "kubeconfig-$cpname"
  else
    kubectl get secret $(kubectl get controlplane $cpname -o=jsonpath='{.status.secretRef.name}') \
      -n $(kubectl get controlplane $cpname -o=jsonpath='{.status.secretRef.namespace}') \
      -o=jsonpath="{.data.$(kubectl get controlplane $cpname -o=jsonpath='{.status.secretRef.key}')}" \
      | base64 -d > "kubeconfig-$cpname"
  fi
  curname=$(kubectl --kubeconfig "kubeconfig-$cpname" config current-context)
  if [ "$curname" != "$cpname" ]
  then kubectl --kubeconfig "kubeconfig-$cpname" config rename-context "$curname" $cpname
  fi
done

    The code above puts the kubeconfig for a control plane $cpname into a file name kubeconfig-$cpname in the local folder. The current context will be renamed to $cpname, if it does not already have that name (which it will for control planes of type "k8s", for example).

    With the above kubeconfig files in place, the control plane named $cpname can be accessed as follows.

    kubectl --kubeconfig "kubeconfig-$cpname" ...

    The individual kubeconfigs can also be merged as contexts of the current ~/.kube/config with the following commands:

    echo "Merging the Control Planes kubeconfigs into ~/.kube/config ..."
cp ~/.kube/config ~/.kube/config.bak
KUBECONFIG=~/.kube/config:$(find . -maxdepth 1 -type f -name 'kubeconfig-*' | tr '\n' ':') kubectl config view --flatten > ~/.kube/kubeconfig-merged
mv ~/.kube/kubeconfig-merged ~/.kube/config

    Afterwards the content of a Control Plane $cpname can be accessed by specifying its context:

    kubectl --context "$cpname" ...

  3. Using import-cp-contexts.sh script

    The following convenience command can also be used to import all the KubeFlex Control Planes in the current hosting cluster as contexts of the current kubeconfig. The script involved requires that you have yq (also available from Homebrew) installed.

    bash <(curl -s https://raw.githubusercontent.com/kubestellar/kubestellar/v$KUBESTELLAR_VERSION/scripts/import-cp-contexts.sh) --merge

    The script above only requires kubectl and yq.

    The script accepts the following arguments:

    • --kubeconfig <filename> specify the kubeconfig of the hosting cluster where the KubeFlex Control Planes are located. Note that this argument will override the content of the KUBECONFIG environment variable
    • --context <name> specify a context of the current kubeconfig where to look for KubeFlex Control Planes. If this argument is not specified, then all contexts will be searched.
    • --names|-n <name1>,<name2>,.. comma separated list of KubeFlex Control Planes names to import. If this argument is not specified then all available KubeFlex Control Planes will be imported.
    • --replace-localhost|-r <host> replaces server addresses "127.0.0.1" with a desired <host>. This parameter is useful for making KubeFlex Control Planes of type host accessible from outside the machine hosting the cluster.
    • --merge|-m merge the kubeconfig with the contexts of the control planes with the existing cluster kubeconfig. If this flag is not specified, then only the kubeconfig with the contexts of the KubeFlex Control Planes will be produced.
    • --output|-o <filename>|- specify a kubeconfig file to save the kubeconfig to. Use - for stdout. If this argument is not provided, then the kubeconfig will be saved to the input specified kubeconfig, if provided, or to ~/.kube/config.
    • --silent|-s quiet mode, do not print information. This may be useful when using -o -.
    • -X enable verbose execution of the script for debugging

Uninstalling the KubeStellar Core chart#

The chart can be uninstalled using the command:

helm uninstall ks-core

This will remove KubeFlex, PostgreSQL, Post Create Hooks (PCHes), and all KubeFlex Control Planes (i.e., ITSes and WDSes) that were created by the chart.

Additionally, if a Kind cluster was created with the provide script, it can be deleted with the command:

kind delete cluster --name kubeflex

Alternatively, if a k3s cluster was created with the provide script, it can be deleted with the command:

/usr/local/bin/k3s-uninstall.sh